MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 16c57/16f57
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Teckkev

USA
1 Posts

Posted - 01/12/2009 :  13:18:59  Show Profile  Reply with Quote
I bought the adapter for the the USB PIC Programmer. I do not know the pins for the PIC16c57/16f57 chip. The datasheet has the pins labeled in a different lingo. I know about the ICSP Mode. When I bought the Universal Adapter, I requested pinouts hoping I would have diagram when it arrived.

TIA!
Kevin
Reply #1

ZLM

2937 Posts

Posted - 01/13/2009 :  01:38:47  Show Profile  Reply with Quote
The Universal adapter is just a open pin adapter. All pins on ZIF socket are open via pin header. So, you can use the jumper wires to connect the pin header to the PIC programemr ICSP port.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000