MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 Topwin 2049 traduction fiasco!		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

ra2ven

2 Posts
Posted - 04/16/2009 :  10:42:36  Show Profile  Reply with Quote
hello, i bought a top2049 recently and i see that there are some words whitout traduction in the software.

I need specially this:

In config (for pic16f84a), above "Config (bit)" there is a tab
whit four options whitout traduction.

Otherwise, if anybody can explain me the mean of the words below "Config (bit)", i would appreciate too.

Please, help.
Reply #1

oozelot

Italy
4 Posts
Posted - 04/16/2009 :  11:50:17  Show Profile  Reply with Quote
you can find the minning of config bit into pic16f84a datasheet

CP CP CP CP CP CP DP CP CP CP PWRTE WDTE FOSC1 FOSC0
bit13 bit0
R = Readable bit
P = Programmable bit
- n = Value at POR reset
u = unchanged
bit 13:8 CP: Program Memory Code Protection bit
1 = Code protection off
0 = Program memory is code protected
bit 7 DP: Data Memory Code Protection bit
1 = Code protection off
0 = Data memory is code protected
bit 6:4 CP: Program Memory Code Protection bit
1 = Code protection off
0 = Program memory is code protected
: Power-up Timer Enable bit
bit 3 PWRTE
1 = Power-up timer is disabled
0 = Power-up timer is enabled
bit 2 WDTE: Watchdog Timer Enable bit
1 = WDT enabled
0 = WDT disabled
bit 1:0 FOSC1:FOSC0: Oscillator Selection bits
11 =RC oscillator
10 =HS oscillator
01 =XT oscillator
00 =LP oscillator
Go to Top of Page
Reply #2

tinhead

Germany
10 Posts
Posted - 04/16/2009 :  12:32:10  Show Profile  Reply with Quote
traduction ? i assume you mean translation.

Probably you have to download latest software version - i have v5.68 - no issues, there is everything in english.
Go to Top of Page
Reply #3

ra2ven

2 Posts
Posted - 04/19/2009 :  02:42:53  Show Profile  Reply with Quote
Its translation, my english......

I couldnt find the latest software, if someone could put a link i would appreciate

Thank you all
Go to Top of Page
Reply #4

tinhead

Germany
10 Posts
Posted - 04/19/2009 :  07:19:50  Show Profile  Reply with Quote
it is always here - h**p://www.top2048.com/gb/tops/topwin5.exe

you can see in change log the date and version : h**p://www.top2048.com/gb/SoftRecord.txt

Version 5.69 E 2009-4-17
LATTICE GAL22V10B/D


thats the latest one...
Edited by - tinhead on 04/19/2009 07:21:21
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000