MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 Pal Problems
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

crusader

6 Posts

Posted - 05/10/2009 :  08:14:03  Show Profile  Reply with Quote
Hi all,I bought a top 2049 for programming eprom and gal but, if i programming or erasing the palce16v8h-25 i have some problems, for example just select the chip gives me "no bit find file" and if I try to erase I answered "0000001000000010000000100000001000000010000000100000001000000010
0000001000000010000000100000001000000010000000100000001000000010
Error at: L0000
Blank Error at ...: 00000 (00) "

there is a solution to solve?

Thank you and hello
Reply #1

tinhead

Germany
10 Posts

Posted - 05/28/2009 :  11:55:24  Show Profile  Reply with Quote
check with the newest software version, h**p://www.top2048.com/gb/tops/topwin5.exe
it is 5.75 ( 5.72 had some pal/gal fix implemented )
Go to Top of Page
Reply #2

crusader

6 Posts

Posted - 06/07/2009 :  08:47:32  Show Profile  Reply with Quote
OK, I had seen that had come out a new version, I installed the new version, the v5.78, and finally I have the full support to palce16v8h, now the law and program well.
5.73 was the version that did not work well.

hello and thanks

Edited by - crusader on 06/07/2009 08:50:19
Go to Top of Page
Reply #3

simeon

United Kingdom
79 Posts

Posted - 06/08/2009 :  14:15:57  Show Profile  Reply with Quote
use usb 1.1 12mbps or usb 1.1 by using usb 1.1 hub
between the programmer and pc etc

this way forces usb 480kbps port to only use 12mbps
as coms to top usb programmer

machine toshiba equium laptop usb only type
p5b asus main machine
thinking of adding dual lpt pci card
both used for top and lpt via usb where i can

old p2 programming grumbling tank with xp sp3 for true serial and lpt

all machines bios set to enable bios plug and play aware o/s and lpt spollers services and drivers removed
legacy detection enabled
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.1 sec. Snitz Forums 2000