MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Open Source Project Willem Programmer Hardware
 Programming a STM27c801 w/ Willem Enhanced Program
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

chaos89-dot-com

7 Posts

Posted - 04/01/2006 :  02:55:34  Show Profile  Reply with Quote
I am having some strange problems trying to program a STM27c801 eprom. I selected the 27c080/801 and noticed it says (PCB3) on the side of it. But I selected it anyways considering I don't have the PCB3 version. After it programs, it doesn't even verify and it gives me an error like 0X00000. What am I doing wrong?
Any help would be appreciated.

Reply #1

ZLM

2937 Posts

Posted - 04/02/2006 :  01:04:40  Show Profile  Reply with Quote
See: http://www.mcumall.com/forum/topic.asp?TOPIC_ID=258
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000