MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Open Source Project Willem Programmer Hardware
 anyone please help can read eprom ?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

jjcool

United Kingdom
1 Posts

Posted - 02/20/2010 :  18:58:52  Show Profile  Reply with Quote
can anyone please help.

i have just bought a Willem pcb 4.5

i am haveing trouble getting 24c32 eprom to read?

im useing usb for power & printer port lead for communications.

programmer tests are ok and see programmer, i set all the dip switches down as stated in eprom50 software i got with programmer.im useing sop 8 clips which are making a good contact on eprom, it says its reading chip but i look in buffer but it just reads lots of 0000000000 ?

i have also tryed reading 24c32 eprom with icprog but get a error "no acknowledge received" ?


anyone please help am i doing somethink wrong never had a williams programmer before.
Reply #1

ZLM

2937 Posts

Posted - 02/21/2010 :  00:03:25  Show Profile  Reply with Quote
If it does not work on two programmer, then it may relate to chip itself.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000