MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 EEprom 28c64		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

sfc

Malaysia
1 Posts
Posted - 09/04/2004 :  19:23:26  Show Profile  Reply with Quote
I am new to this type of EEprom, appreciate some advice from the master.

I am using a Intronics pocket programmer to copy the content of the old EEprom 28c64 to a file and it successed but when I try to program this file to a blank EEprom 28c64 it fails!

best regards
Reply #1

someone

28 Posts
Posted - 09/06/2004 :  09:19:29  Show Profile  Reply with Quote
If you can read it then you need check the Vpp pin of the programmer when you doing the programming. It should be 12.75V or 21V or 25V depend on your chip Vpp speicification. If the Vpp is correct, then your software has bug.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.07 sec. Snitz Forums 2000