MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 xc9536xl programming
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

hellbelly

United Kingdom
5 Posts

Posted - 06/09/2010 :  22:29:48  Show Profile  Reply with Quote
Hi

A couple of years ago I purhcased a dual power willem, parallel port version which I have been using fine to to programme a couple of PICs and some 40pin DIP EPROMS (27c4096) with an Eprom 16bit DIP40 adaptor.

Now I would like to be able to read and write the xc9536xl by xilinx. Except I am not having much help at confirming how to do it. Is the xilinx chip an equivalent of something else that I can select in the willem eprom software? Do I have to purchase another adapter?

Sorry for the novice questions, I'm not very clued up with this and just got confused with I googled it

Ta
Pete
Reply #1

ZLM

2937 Posts

Posted - 06/10/2010 :  16:38:32  Show Profile  Reply with Quote
The Dual power Willem programmer does not support JTAG programming. So it does not support your XC9536xl chip.

The latest GQ-4X has JTAG programming feature. It can program XC9536xl chip. But it does not read the chip to buffer.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000