MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Wellon/WEILEI USB Programmer
 Wellon VP990
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

benaknoun

Spain
133 Posts

Posted - 01/07/2012 :  07:57:46  Show Profile  Reply with Quote
Hi
Can i ask for help/support about this model on this forum?
I am having trouble using this programmer
It keeps telling me that the chip is inserted backwards..
I normally use the GQ-4X programmer to read and write 24cxx and 25cxx...etc
I don't desolder the chips, I use the test clip that I also bought from mcumall, this one:
http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4481
And I never had any problems.

I am using the same test clip on the VP990 bu this won't work, either it read ok but the buffer is FFFFFFF
Or, It gives an error message: "the chip is inserted backwards or already damaged"
I am being told that I must desolder the chips as the VP990 does not work on soldered chips on board
Is this right?
Can someone give advice please ?

Thanks in advance

Edited by - benaknoun on 01/07/2012 16:17:17
Reply #1

benaknoun

Spain
133 Posts

Posted - 01/19/2012 :  10:06:56  Show Profile  Reply with Quote
No One ???
Go to Top of Page
Reply #2

ZLM

2937 Posts

Posted - 01/22/2012 :  23:42:31  Show Profile  Reply with Quote
The programmer may not allow to programming in circuit like the way by GQ-4X. The VP-990 may have ISP adapter.
Go to Top of Page
Reply #3

benaknoun

Spain
133 Posts

Posted - 01/23/2012 :  14:54:00  Show Profile  Reply with Quote
Hi
Yes it has a ISP socket at the back...
Maybe this programmer does not support reading on board ??
Go to Top of Page
Reply #4

benaknoun

Spain
133 Posts

Posted - 02/03/2012 :  14:03:06  Show Profile  Reply with Quote
quote:
Originally posted by ZLM

The programmer may not allow to programming in circuit like the way by GQ-4X. The VP-990 may have ISP adapter.



Hi, yes you are right
VP990 does not allow in circuit programming
After desoldering the chip and using the right adapter, it works OK
Just more hassle compared to GQ-4X

Regards
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000