MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Mx29lv160		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

tahir

United Kingdom
45 Posts
Posted - 04/18/2012 :  13:36:18  Show Profile  Reply with Quote
Hi could anyone help me I'm programing a mx29lv160 when I erase chip it says erase ok but fails blank check it program s ok but fails on verify but compares good is it possible the chip is faulty thanks
t.hussain
Reply #1

ZLM

2937 Posts
Posted - 04/20/2012 :  23:01:18  Show Profile  Reply with Quote
if blankcheck failed, then the erase is fail.

If the chip is locked, then you need to unloack the chip before write it.
Go to Top of Page
Reply #2

ZLM

2937 Posts
Posted - 05/01/2012 :  20:14:40  Show Profile  Reply with Quote
Not sure the FlashPRo 400+. I am only know the GQ-4X. On GQ-4X, there is a unlock feature, it can unlock whole chip.
Go to Top of Page
Reply #3

vendest

5 Posts
Posted - 01/15/2017 :  15:39:22  Show Profile  Reply with Quote
Hi guys, I'm new here.
Bumping on this old thread as I'm having a similar issue
Trying to program a MX29LV160TM with TOP 3100.
The program seems to be writing upon verifying the chip is still blank.
Understand from above that the eeprom could be locked/protected. Is there a way to unlock the chip from topwin7?

Thanks,
Jerome
Go to Top of Page
Reply #4

ZLM

2937 Posts
Posted - 01/22/2017 :  18:36:28  Show Profile  Reply with Quote
Try on new chips. Brand new chip never in a locked state.
Go to Top of Page
Reply #5

vendest

5 Posts
Posted - 01/25/2017 :  02:10:13  Show Profile  Reply with Quote
quote:
Originally posted by ZLM

Try on new chips. Brand new chip never in a locked state.


Thanks for the information about new chip.
I have tried a bunch of new chips but still having the same issue.
Even tried 2 different SOP44/DIP40 adapters.
The chip is recognized properly but the data programmed passes thru.
I've been using this programmer to burn regular Eprom mainly with no problem. I
Go to Top of Page
Reply #6

vendest

5 Posts
Posted - 02/01/2017 :  08:07:12  Show Profile  Reply with Quote
Managed to program successfully a MX29F800TMC-90 with TOP3100.
The programmer might just not be compatible with MX29LV160TM.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000