MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X Initialization failed
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

KillMe3

Germany
7 Posts

Posted - 01/19/2013 :  15:30:13  Show Profile  Reply with Quote
Hi all,
I have recently purchased a GQ-4X.
After reading some eeproms I got the following error

Initialization failed. Please reconnect.
After reboot an a lot of trys to reconnect the programmer I reinstall the software and the usb driver.
My OS: Windows 7 x64


Ive still the same error. Initialization failed. Please reconnect.

Please help me....

Thx you all

Edited by - KillMe3 on 01/19/2013 15:31:11
Reply #1

ZLM

2937 Posts

Posted - 01/24/2013 :  12:18:55  Show Profile  Reply with Quote
Change to another USB cable, if problem presist, then you may need to contact support@mcumall.com for the exchange.
Go to Top of Page
Reply #2

kbzaloka

8 Posts

Posted - 10/10/2013 :  01:55:47  Show Profile  Reply with Quote
quote:
Originally posted by KillMe3

Hi all,
I have recently purchased a GQ-4X.
After reading some eeproms I got the following error

Initialization failed. Please reconnect.
After reboot an a lot of trys to reconnect the programmer I reinstall the software and the usb driver.
My OS: Windows 7 x64


Ive still the same error. Initialization failed. Please reconnect.

Please help me....

Thx you all





did you solve it?

i have mine with same error on vista(x86) and XP SP3

can you contact with support ?
Go to Top of Page
Reply #3

josete2k5

1 Posts

Posted - 04/09/2015 :  09:12:05  Show Profile  Reply with Quote
Hi I have same problem, but it was when I changed to a new computer with W7x64.

h**p://youtu.be/qh-QSjBD8to

I've tested back in my old computer and I have same problem (it was working before).

I've contacted with the support and it will cost around 60$ to fix my unit... I'm pretty sure that is a problem with YOUR software/hardware and I'm not agree with those taxes... I do not have any guarrantee because I purchased it two years ago, but I used it no more than 10 times.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.19 sec. Snitz Forums 2000