MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Programming ATTiny2313 and ATmega8
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Zer0-2k10

Canada
1 Posts

Posted - 04/09/2013 :  01:10:55  Show Profile  Reply with Quote
Hi,
I need some advice on programming atmel's ATTiny2313 and ATmega8. I got the GQ-4X and its telling me i need a AVRISP Connection. I just need to program a few .hex's to these atmel devices. What do i need program them using my GQ-4X?.

Thank you,
Zer0
Reply #1

ZLM

2937 Posts

Posted - 04/24/2013 :  23:00:47  Show Profile  Reply with Quote
ATTiny2313 doesn not need the AVRISP. You can program it on the ZIF socket.

The ATmega8 you need to connect the VCC and VDD and a crystal is you enabled the external OSC. And then connect the AVRISP pins to programmer ZIF as showed in the software.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000