MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 it was a great programmer.... while it lasted		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Irvingw

2 Posts
Posted - 01/09/2014 :  07:49:42  Show Profile  Reply with Quote
Good day to all;

I have a GQ-4X programmer, which worked great for the better part of the year. Now, I just get a power light, but the program won't recognize it.

Can anyone suggest a solution here?

Kind thanks.
Reply #1

ZLM

2937 Posts
Posted - 01/11/2014 :  09:43:54  Show Profile  Reply with Quote
Check the USB driver first and see if the driver is loaded correctly.
See Reply #6 from:
http://www.mcumall.com/forum/topic.asp?TOPIC_ID=2030
Go to Top of Page
Reply #2

Irvingw

2 Posts
Posted - 01/20/2014 :  11:38:10  Show Profile  Reply with Quote
I've tried to re-install the USB driver, as it does seem to be corrupted. However, when I access the driver via the control panel, and it gives me the option to re-install.... It asks for a "co-installer", which should be on the disc. Unfortunately, I'm missing the disc, and can't seem to re-create this software install. Any suggestions?
Thanks.
Go to Top of Page
Reply #3

ZLM

2937 Posts
Posted - 01/20/2014 :  17:51:21  Show Profile  Reply with Quote
You can download the RE2.01 driver from:

http://www.mcumall.com/download/TrueUSBWillem/USBDriverV2.0.1_32_64Bit.zip
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000