MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 MX25L1005A verify Failed please help
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

joelz

Indonesia
34 Posts

Posted - 02/08/2014 :  02:10:30  Show Profile  Reply with Quote
Using adapter ADP-004 SOIC8 (150mm) with MX25L1005A:
Erase - pass!
Blank check - pass!
Write - pass!
VERIFY - Always failed on the same code

"Verify failed,address 0x000000,Device=0xff,Buffer=0x002"

Please help for solution
Reply #1

ZLM

2937 Posts

Posted - 02/09/2014 :  00:55:32  Show Profile  Reply with Quote
Does it ID the chip? if so, try slower speed.
Go to Top of Page
Reply #2

osvaldo

Argentina
148 Posts

Posted - 02/09/2014 :  12:59:47  Show Profile  Reply with Quote
fijate memory this good contacts clean ic adapter and if that does not throw that error. if you can look at the data sheet saver memory to the memory id

osvaldo tecnico
Go to Top of Page
Reply #3

Craberry

Indonesia
1 Posts

Posted - 06/14/2014 :  20:14:24  Show Profile  Reply with Quote
i have the same problem.. it has the same symptom in slower speed, always problem with verify process..
"Verify failed,address 0x000000,Device=0xff,Buffer=0x002"
MX25L1005AMC ----------->> MX25L1005MI (ID check pass, meanwhile using MX25L1005MC -->> ID Check fail)
I already clean the ic pin and the adapter..
Any solution for this problem ?
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.11 sec. Snitz Forums 2000