MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Automobile engine ECU, Immo, Air bag chip tunning
 verify M93C56
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

ricampr

Portugal
21 Posts

Posted - 04/30/2010 :  12:49:47  Show Profile  Reply with Quote
Hello.
I have an eprom M93C56.
read ok
write ok
verify failed

which may be the problem?

thanks
Reply #1

ZLM

2937 Posts

Posted - 05/06/2010 :  16:21:45  Show Profile  Reply with Quote
What adapter you used?
Check pin contact.
Go to Top of Page
Reply #2

brchip

Brazil
16 Posts

Posted - 06/26/2010 :  16:48:24  Show Profile  Reply with Quote
I'm having the same problem. I'm using 3M soic8 clip. I used this clip for other chips and it worked fine.

Please help.
Go to Top of Page
Reply #3

brchip

Brazil
16 Posts

Posted - 06/26/2010 :  16:56:49  Show Profile  Reply with Quote
Same here. I'm usng 3M clip with sw v4.01. Should I upgrade to the latest sw?

I tried different speeds and devices (8 and 16 bits) but no luck.

Any ideas?
Go to Top of Page
Reply #4

ZLM

2937 Posts

Posted - 06/26/2010 :  21:33:23  Show Profile  Reply with Quote
Are you doing it while the chip on the PCB?
Go to Top of Page
Reply #5

brchip

Brazil
16 Posts

Posted - 06/27/2010 :  04:40:09  Show Profile  Reply with Quote
Tried both ways. Reads and writes but verifiy gives error.

I tried 8 bit and 16. Is there a way to know which is the correct?
Go to Top of Page
Reply #6

ZLM

2937 Posts

Posted - 06/27/2010 :  06:32:34  Show Profile  Reply with Quote
I recommend you to remove the chip from PCB and put it in the adapter to read and write.

That way is the standard programming way.
Go to Top of Page
Reply #7

brchip

Brazil
16 Posts

Posted - 06/27/2010 :  16:39:21  Show Profile  Reply with Quote
I already did, but it always gives an error in the verification.
Go to Top of Page
Reply #8

ZLM

2937 Posts

Posted - 07/01/2010 :  09:50:01  Show Profile  Reply with Quote
use slower speed.

See:
www.youtube.com/watch?v=ibd910i48CE
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000