MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X swapping
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

fadhle

Yemen
4 Posts

Posted - 08/30/2014 :  04:24:03  Show Profile  Reply with Quote
Hello guys, i have a GQ-4x it is a good programmer, but when i read 93lc66B - 93c66B - 93c46b the reading on the buffer is swapping,why?
but for reading ATMEL25020 & ATMEL25040 it is read ok,
can any one help me to get the right reading from these EEproms,regards.

fadhle

Edited by - fadhle on 08/31/2014 04:10:43
Reply #1

ZLM

2937 Posts

Posted - 09/01/2014 :  09:07:31  Show Profile  Reply with Quote
That is fine. You can just click the A/B Swap button to swap it back.

The Hi-Lo byte order is depending on programmer software used. As long as your chip works in your machine, then it is not important. The only thing is the data file is not compatible with other programmer software.

But GQ-4X software has Swap button to correct this problem.
Go to Top of Page
Reply #2

fadhle

Yemen
4 Posts

Posted - 09/03/2014 :  04:09:16  Show Profile  Reply with Quote
many thanks to you my friend, i have x prog and top programmer when i read dump it is ok shown in buffer as it is written in the eeprom,how i know after reading by GQ-4x are the data in buffer are swap or not, since not all eeproms that are reading by gq-4x are swapping,
are all gx-4x do like my Gq-4x or my problem in software or in hardware,I install the latest version 6.30,king regards.

fadhle
Go to Top of Page
Reply #3

ZLM

2937 Posts

Posted - 09/05/2014 :  20:45:07  Show Profile  Reply with Quote
The GQ-4X software used international standard Little-endian format. So, it is correct.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.1 sec. Snitz Forums 2000