MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Programming 29f040 & 28f800 using ADP-077-ADP-082
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

dgdiniz

10 Posts

Posted - 01/25/2015 :  07:11:08  Show Profile  Reply with Quote
Hi, I have the adapter 077+082 that I use to program the 29f032 (Tsop40).

Is it possible to use this adapter to program the 29f040 (Tsop32) and the 28f800 (Tsop48)?

The 28f800 (more preciselly the TE28f800 from Intel) seem to use the "ADP-042 TSOP48 16 BIT Mode".

The adapter for 29f032 (this 077+082) suports Tsop48 chips, so is it possible to use this adapter to program the 28f800?

And about the 29f040 (Tsop32)?

Thanks....

Edited by - dgdiniz on 01/25/2015 07:12:45
Reply #1

ZLM

2937 Posts

Posted - 01/25/2015 :  18:12:44  Show Profile  Reply with Quote
Since you alrady have ADP-077, so, you do not need buy ADP-077 again.

You only need:

1. ADP-083 for 29F040 TSOP32 chip
http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4440

2. ADP-073 for your TSOP48 TE28F800
http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4401


Those chips use different adapters.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.12 sec. Snitz Forums 2000