MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 AB28F800 PSOP with DIP44 adapter
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

iblackford

Canada
3 Posts

Posted - 04/29/2015 :  19:31:07  Show Profile  Reply with Quote
Hi All,

I have a 28f800, PSOP, in a DIP44 socket. I also have a GQ-4X. From what I understand I will have to do the following:

-put device in byte mode instead of word mode
-hook up A0-A18 to A0 to A18

My question is where do I connect A-1? Does this connect to A19?

Thanks for any help, Ivan
Reply #1

ZLM

2937 Posts

Posted - 04/30/2015 :  18:53:05  Show Profile  Reply with Quote
If you use ADP-019 from MCUmall, then you do not need to connect any address line.

Only the ADP-019 adapter is needed to connect.
Go to Top of Page
Reply #2

iblackford

Canada
3 Posts

Posted - 05/03/2015 :  15:33:52  Show Profile  Reply with Quote
While I know there is a plug and play adapter, and I thank you for that, I'm asking for instructions on making what I have work.

Thanks, Ivan
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000