MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 GQ-5X
 GQ-5X won't work after upgrade to Windows 10
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Lookimback

USA
21 Posts

Posted - 07/29/2015 :  23:23:16  Show Profile  Reply with Quote
It's just saying not activated and isn't giving me an option to reactivate. Also says device not connected so I think it's a driver issue.
Reply #1

Lookimback

USA
21 Posts

Posted - 07/29/2015 :  23:56:48  Show Profile  Reply with Quote
The 4X no longer works either. Both need drivers. I hope this gets fixed soon.
Go to Top of Page
Reply #2

Lookimback

USA
21 Posts

Posted - 07/30/2015 :  10:01:11  Show Profile  Reply with Quote
OK, the problem was that I had to disable driver signature enforcement in Windows. I got the drivers to install, and both the 4X and 5X work again, but there seems to be a bug. With the 5X, if I change the device to one different than what I'm trying to read, the activation status changes to unactivated and I have to disconnect and reconnect the programmer before I can select the correct device. I haven't tried the 4X, aside from checking to see if it was recognized.

Edited by - Lookimback on 07/30/2015 10:02:42
Go to Top of Page
Reply #3

ZLM

2937 Posts

Posted - 08/07/2015 :  13:07:07  Show Profile  Reply with Quote
Only GQ-5X NAND and GQ-5X SPI need activation. GQ-4X software does not need to be activated.

Change the device from NAND to SPI need to change the top module. IT has different activation code. So, it need to be re-active the software. But that should be easier as a one mouse click on activation window "On Line Activation" button.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000