MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 TOP2005 and Atmel AT22V10L		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Bill

USA
2 Posts
Posted - 06/06/2007 :  11:47:31  Show Profile  Reply with Quote
Hi,

I just purchased a TOP2005 for the sole purpose of copying a AT22V10L chip to repair a machine. When I put the AT22V10L chip in the programmer it reports back that it is blank and if I read it all I get are all 1's. I know the chip is not blank. I want to copy the program over to an ATF22V10. If I put an ATF22v10 chip in the machine it reads and writes it correctly. I tried the newest Topwin version and an old version. Any suggestions?
Reply #1

ZLM

2937 Posts
Posted - 06/08/2007 :  10:39:49  Show Profile  Reply with Quote
The chip been locked up?
If the chip been enabled the security bit, then you can not read.
Go to Top of Page
Reply #2

Bill

USA
2 Posts
Posted - 06/13/2007 :  10:26:26  Show Profile  Reply with Quote
Thanks for the post. I don't know anything about this burner but I would have thought that it would give me an error when I try to read the chip instead of saying it is blank.
Go to Top of Page
Reply #3

ZLM

2937 Posts
Posted - 06/13/2007 :  22:08:15  Show Profile  Reply with Quote
The lock bit can not be read out when reading normal reading.

This is chip's security feature.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.07 sec. Snitz Forums 2000