MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Add device: MX29F800C
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Ziggy587

USA
21 Posts

Posted - 08/13/2016 :  17:04:37  Show Profile  Reply with Quote
Hello,

I see similar devices but they are not working for me. Can we please add MX29F800C to the supported devices?

MX29F800CTTI

MX29F800CBTI

Data sheet: h**p://www.macronix.com/Lists/Datasheet/Attachments/3094/MX29F800C%20T-B,%205V,%208Mb,%20v1.2.pdf

Thank you!

Edited by - Ziggy587 on 08/13/2016 17:06:49
Reply #1

ZLM

2937 Posts

Posted - 08/13/2016 :  23:41:23  Show Profile  Reply with Quote
Try those lines:


Name="MX29F800T*TSOP48",ID="C2D6",Class="29F800T",Category="FLASH",MFG="Macronix",Adapter=""ADP-003 TSOP48 8 BIT Mode",RVPP="5V",Speed="3",Message="Set the adapter to 5V jumper position.";
Name="MX29F800B*TSOP48",ID="C258",Class="29F800B",Category="FLASH",MFG="Macronix",Adapter=""ADP-003 TSOP48 8 BIT Mode",RVPP="5V",Speed="3",Message="Set the adapter to 5V jumper position.";

Go to Top of Page
Reply #2

Ziggy587

USA
21 Posts

Posted - 08/14/2016 :  06:22:37  Show Profile  Reply with Quote
Those lines worked, thanks!

For the record, I was using the wrong base adapter. The PSOP versions of those chips would probably work as well.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000