MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 M35080 READ WRITE
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

martininkent

United Kingdom
6 Posts

Posted - 01/22/2017 :  09:58:58  Show Profile  Reply with Quote
hello this is the problem iam now getting was fine , but now it will not read or right,,, iam thinking its the programmer, I have bought new 004 and 088 adapters again,



Image Insert:

1080078 bytes

Edited by - martininkent on 01/22/2017 10:03:54
Reply #1

martininkent

United Kingdom
6 Posts

Posted - 01/22/2017 :  11:29:50  Show Profile  Reply with Quote
by the way this is a new chip , iam trying to write too
Go to Top of Page
Reply #2

vibroverbus

USA
7 Posts

Posted - 04/26/2018 :  04:22:09  Show Profile  Reply with Quote
Be sure you are using the right pin-out / adapter.

Even so I find I also cannot write some brand new V6 chips I have.

I suspect either the programmer is not using enough voltage, or, there is a chip issue (i.e. counterfeits / out of spec / mis-formatted from factory). I've been told to use either a different programmer, like an R270, or one of those "M35080 dedicated" programmers to erase them again, which seems like a terrible waste of $$$ since you'd think a generic programmer should be able to do it given the right instructions. Maybe the MCUMall programmer isn't providing high enough voltage...?

Edited by - vibroverbus on 04/26/2018 09:19:11
Go to Top of Page
Reply #3

anniel

2531 Posts

Posted - 04/26/2018 :  14:57:59  Show Profile  Reply with Quote
quote:
Originally posted by vibroverbus

I've been told to use either a different programmer, like an R270, or one of those "M35080 dedicated" programmers to erase them again, which seems like a terrible waste of $$$ since you'd think a generic programmer should be able to do it given the right instructions.


True!
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000