| T O P I C R E V I E W |
| John LaSpisa |
Posted - 10/11/2026 : 07:26:03
Newbie here. I chose my device (TMS2764) how do I check/verify the voltage that the GQ-4x4 will use when writing to it. I Googled it and it said to click on the "i". Maybe I do not see an "i" anywhere. I have rev 7.41. Thanks for any help. |
| 2 L A T E S T R E P L I E S (Newest First) |
| 1winbizpk |
Posted - 10/27/2026 : 13:45:46
In the GQ software, once you select the TMS2764, there should be an info icon or a device detail button near the top that shows programming voltages. You can also check the TMS2764 datasheet — it typically programs at 21V Vpp. The GQ-4x4 should set this automatically when you select the device, but measuring with a multimeter on the Vpp pin before writing is always a good sanity check. |
| EmfDev |
Posted - 10/13/2026 : 16:49:16
Using a multimeter to check or oscilloscope. |
