| T O P I C R E V I E W |
| Bamse82 |
Posted - 03/21/2026 : 07:07:44
Hi guys! Managed to desolder the 93c56 on a broken toyota denso ecu.
I just wan't to practice on this one for a immo off...
I read the eproom, did immo off in toyolex.
But every time I try to program it in XProg it says: "Verifying FLASH... ERROR! FLASH ADRESS 0X000018 Buf_Val: 0x2112 IC_ Val 0x0000 Programming Failed......
Have tried other files I found on the forums with the same eeprom. Same error.
I can reprogram the ori file with no errors...
What am I doing wrong???
This Toyota Yaris is about to buuuurnnn.
EDIT! Unblocked the optinion "Verify after" and it was sucessed. But when I read the eproom once again the ori file is still in there.
Is this a joke? |
| 17 L A T E S T R E P L I E S (Newest First) |
| anniel |
Posted - 04/16/2026 : 13:29:32
quote:
Originally posted by Bamse82
Yes I did a blank check.
Are you able to erase the chips? |
| Bamse82 |
Posted - 04/15/2026 : 10:53:02
Yes I did a blank check. |
| anniel |
Posted - 04/15/2026 : 08:19:32
quote:
Originally posted by Bamse82
Did you do a blank check? |
| Bamse82 |
Posted - 04/14/2026 : 10:40:34
|
| anniel |
Posted - 04/14/2026 : 07:48:18
quote:
Originally posted by Bamse82
Tested with the GQ-4x4 now. Get verify fail on this one too. What am I doing wrong???
Have tested two blank eeproms and two from ecus. Have also tried many different 93c56 versions in the device menu. Tested with different speeds.
And also tested with a solder adapter, clip adapter and a adapter thst reminds of adp-004 which was included from the t48.
Please give me some hope. 3 months on this stupid toyota now and can't get anything to work
Please post a picture of your setup. |
| Bamse82 |
Posted - 04/12/2026 : 11:15:58
Tested with the GQ-4x4 now. Get verify fail on this one too. What am I doing wrong???
Have tested two blank eeproms and two from ecus. Have also tried many different 93c56 versions in the device menu. Tested with different speeds.
And also tested with a solder adapter, clip adapter and a adapter thst reminds of adp-004 which was included from the t48.
Please give me some hope. 3 months on this stupid toyota now and can't get anything to work |
| anniel |
Posted - 04/10/2026 : 05:29:27
quote:
Originally posted by Bamse82
Ordered a gq4x4. I will report after test
Yes, please do so. |
| Bamse82 |
Posted - 04/09/2026 : 09:22:02
Ordered a gq4x4. I will report after test |
| anniel |
Posted - 04/09/2026 : 05:55:06
quote:
Originally posted by Bamse82
Maybe... I use a t48 programmer. But do you think a gq-4x4 will do the job?
93C56 is compatible with the GQ-4X4 in 8 and 16 bit. |
| Bamse82 |
Posted - 04/08/2026 : 13:15:52
Maybe... I use a t48 programmer. But do you think a gq-4x4 will do the job? |
| anniel |
Posted - 04/08/2026 : 10:11:34
quote:
Originally posted by Bamse82
Nope. Can't program any 93c56... even ordered blank eeproms but No sir
Bad programmer? |
| Bamse82 |
Posted - 04/07/2026 : 12:54:03
Nope. Can't program any 93c56... even ordered blank eeproms but No sir |
| anniel |
Posted - 03/23/2026 : 07:25:44
quote:
Originally posted by Bamse82
But I could read it 7 times with no problems? Could also program it with ori data
Can you successfully program other 93C56 chips? |
| Bamse82 |
Posted - 03/23/2026 : 02:27:55
But I could read it 7 times with no problems? Could also program it with ori data |
| anniel |
Posted - 03/22/2026 : 08:00:18
quote:
Originally posted by Bamse82
Ra57/93c56 on the eeprom. The ecu is a 27036-1152 [PCB]
Chip is probably damaged. |
| Bamse82 |
Posted - 03/21/2026 : 21:58:20
Ra57/93c56 on the eeprom. The ecu is a 27036-1152 [PCB] |
| anniel |
Posted - 03/21/2026 : 13:27:34
quote:
Originally posted by Bamse82
Hi guys! Managed to desolder the 93c56 on a broken toyota denso ecu.
I just wan't to practice on this one for a immo off...
I read the eproom, did immo off in toyolex.
But every time I try to program it in XProg it says: "Verifying FLASH... ERROR! FLASH ADRESS 0X000018 Buf_Val: 0x2112 IC_ Val 0x0000 Programming Failed......
Have tried other files I found on the forums with the same eeprom. Same error.
I can reprogram the ori file with no errors...
What am I doing wrong???
This Toyota Yaris is about to buuuurnnn.
EDIT! Unblocked the optinion "Verify after" and it was sucessed. But when I read the eproom once again the ori file is still in there.
Is this a joke?
What is the complete part number? |
