| T O P I C R E V I E W |
| Mitsiman |
Posted - 11/05/2023 : 08:43:43
HI I am a tuner for remapping stock ECU's but very new to the BIOS chip tuning side of things.
I am wanting to reprogram a range of early model Hyundai ECU's which use the 27C512 chip set. Below is the information I have to date on the units (From various model ecu's they are fitted to)
TI-15FMT - B 58 550 - BLX56A3FRP - 6S223F - PLCC32 - 27C512 (64KB) - M27C512-15XC1 / 27C512-15XC1 / 27C512 / ST EPROM
TI-15FMT - B 58 550 - BLX56A3FRP - 6S021G - PLCC32 - 27C512 (64KB)
TI-15FMT - B 58 550 - BLX56A3FRP - 6S152 (028) - PLCC32 - 27C512 (64KB)
TI-15FMT - B 58 550 - BLXBA4ENP - 92132G (053) - PLCC32 - 27C512 (64KB)
Could I please be shown exactly which model universal programmer kit and adapters I need to enable me to do the reading / writing.
Additionally confirmation of what replacement chips I can use and where I can purchase them from. I researched what I found are some chips from various suppliers, but before i order anything I am wanting to make sure I both understand and order the correct parts.
Final question - is there a way I can do any form of tuning on a car with this system - setup some form of adapter onto a doner ECU to enable me to run the car, check logs, write straight to the ecu whilst connected to the car and then continue until I have completed the tune. Then do a final write and transfer the chip to the customers ECU permanently?
Thank you very much for your help - if there are any experienced people in Australia, I would love to talk to you and be more informed on this process.
I found most of my information from the following link which may provide more information on the ECU's I am wanting to retune
www.rodrigog.net/hyundaiaccent/index.htm
Thanks in advance.
|
| 5 L A T E S T R E P L I E S (Newest First) |
| Mitsiman |
Posted - 11/16/2023 : 17:55:52
quote:
Originally posted by anniel
quote:
Originally posted by Mitsiman
IS this what you mean - its what I sort of had in my head
https://microcontrollershop.com/product_info.php?products_id=5151
https://www.dobbertin-elektronik.de/simulate/eerom.engl.htm
Thank you very much that explains things I will order that and get the ball rolling. Starting to get excited about what we can do now
|
| anniel |
Posted - 11/14/2023 : 08:50:12
quote:
Originally posted by Mitsiman
IS this what you mean - its what I sort of had in my head
https://microcontrollershop.com/product_info.php?products_id=5151
https://www.dobbertin-elektronik.de/simulate/eerom.engl.htm |
| Mitsiman |
Posted - 11/12/2023 : 23:48:35
IS this what you mean - its what I sort of had in my head
https://microcontrollershop.com/product_info.php?products_id=5151
|
| Mitsiman |
Posted - 11/12/2023 : 23:45:37
Thank you for that information it aided a lot.
I have ordered the programming unit and am working on ordering the chips now.
In relation to the emulator can you provide more information on this, what do I need to purchase etc. I only a have vague idea of how to do this at this point in time.
|
| anniel |
Posted - 11/06/2023 : 07:18:01
quote:
Originally posted by Mitsiman
HI I am a tuner for remapping stock ECU's but very new to the BIOS chip tuning side of things.
I am wanting to reprogram a range of early model Hyundai ECU's which use the 27C512 chip set. Below is the information I have to date on the units (From various model ecu's they are fitted to)
TI-15FMT - B 58 550 - BLX56A3FRP - 6S223F - PLCC32 - 27C512 (64KB) - M27C512-15XC1 / 27C512-15XC1 / 27C512 / ST EPROM
TI-15FMT - B 58 550 - BLX56A3FRP - 6S021G - PLCC32 - 27C512 (64KB)
TI-15FMT - B 58 550 - BLX56A3FRP - 6S152 (028) - PLCC32 - 27C512 (64KB)
TI-15FMT - B 58 550 - BLXBA4ENP - 92132G (053) - PLCC32 - 27C512 (64KB)
Could I please be shown exactly which model universal programmer kit and adapters I need to enable me to do the reading / writing.
Additionally confirmation of what replacement chips I can use and where I can purchase them from. I researched what I found are some chips from various suppliers, but before i order anything I am wanting to make sure I both understand and order the correct parts.
Final question - is there a way I can do any form of tuning on a car with this system - setup some form of adapter onto a doner ECU to enable me to run the car, check logs, write straight to the ecu whilst connected to the car and then continue until I have completed the tune. Then do a final write and transfer the chip to the customers ECU permanently?
Thank you very much for your help - if there are any experienced people in Australia, I would love to talk to you and be more informed on this process.
I found most of my information from the following link which may provide more information on the ECU's I am wanting to retune
www.rodrigog.net/hyundaiaccent/index.htm
Thanks in advance.
https://www.mcumall.com/store/index.php?route=product/product&path=25_66&product_id=47
https://www.digikey.com.au/en/products/filter/memory/774?s=N4IgjCBcpgbFoDGUBmBDANgZwKYBoQB7KAbXAA5yAWKgBhAF0CAHAFyhAGVWAnASwB2AcxABfAgFoATAhDJIvAK74ipEAFZGo8SBmQyUgOwBhdWBkNRQA
For your final question you need an emulator. |
