T O P I C R E V I E W |
dewey |
Posted - 04/08/2018 : 04:04:04 I have a tek 2430a scope and the batteries in the old chips are going. I have a pair of new maxims coming along with the zif sockets to replace them. what programmer do I need to copy the old program and burn it to the new chips?do I need the ezo or do I need the willem? |
4 L A T E S T R E P L I E S (Newest First) |
dewey |
Posted - 04/19/2018 : 17:16:03 done, done, and done. worst part was taking the blooming thing apart and getting it back together again. I used a tl866 plus to lift and reprogram the new sram 2015 date code so if these make 30 yrs someone else will worry about it then. thanks for the help fellows. |
anniel |
Posted - 04/08/2018 : 12:29:37 quote: Originally posted by dewey
ds1230ab, this is a new laptop and has something quirky about it. it likes to make corrections on its own. the mouse pointer will split a word or number and put one before the other.on the other side if you leave it on a link or a page over something it will take off on its owm. chip is ds1230ab
DS1230AB, that's what I figured unless new chips where around... GQ-4X is fine with those.
Don't leave your new laptop alone with those BIN files. |
dewey |
Posted - 04/08/2018 : 11:58:03 ds1230ab, this is a new laptop and has something quirky about it. it likes to make corrections on its own. the mouse pointer will split a word or number and put one before the other.on the other side if you leave it on a link or a page over something it will take off on its owm. chip is ds1230ab |
anniel |
Posted - 04/08/2018 : 08:13:35 1320 or 1230? |