T O P I C R E V I E W |
werejag |
Posted - 07/30/2007 : 23:19:18 so far i have verified from a friend the supposed bad eproms 27c160s are indead good. so why cant my programmer do these?
i have the 3 jumper wires on a19 22 20 from 16 dit adator to the a19 22 20 on programmer
im using wallwart power not usb
|
7 L A T E S T R E P L I E S (Newest First) |
werejag |
Posted - 08/16/2007 : 04:56:07 emails are now being bounced back is there a problem john? |
werejag |
Posted - 08/01/2007 : 21:56:44 so no trouble shooting. just give into rma eh |
ZLM |
Posted - 08/01/2007 : 20:39:17 I think you need to send the programmer, adapter with the chip together back to check it. Write email to support@mcumall.com ask for a RMA. |
werejag |
Posted - 08/01/2007 : 01:53:49 my friend is using a non Willem programmer. so i can not just test the adaptor
im using the dual power Willem with 16 bit non zif adapter from this site. this is why i come here.
ive increased twp and twp without any success.
when i got this programmer i trouble shot it and found the dip switches dead and was sent a replacement. which i desoldered out and replaced this has been a very troublesome.
|
ZLM |
Posted - 07/31/2007 : 20:17:00 What's your friend programmer and adapter? Is it same as your?
It seems software related bug. But not confirmed. Increase the tWp and tWc will improve the result.
Or the adapter related. Can you let me know your friend adapter where came from? |
werejag |
Posted - 07/31/2007 : 14:33:12 it will not program chips aka 27c160 later found to be good when sent to a friend to program. it will program and fail randomly. |
ZLM |
Posted - 07/31/2007 : 10:14:53 What's the exact error? |