MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 Help needed

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List Spell Checker
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

   Insert an Image File
Check here to include your profile signature.
    

T O P I C    R E V I E W
jpod1977 Posted - 07/15/2005 : 10:06:03
Need some help on what type of programing device to get
I'm programing AMD 27c512 in a DIP24 format that requires 12.75v to program
I currently have the top853 programer and it can olny read the chips because ther is no way to 12.75v to pin 22(Vpp) on the chip Because Of the 5v limit of the USB
4   L A T E S T    R E P L I E S    (Newest First)
jpod1977 Posted - 07/15/2005 : 11:20:48
Thank you much im ordering it now
usb Posted - 07/15/2005 : 11:12:28
Aha! It's not a good sign if smoke came out from the programmer board. Then you need a new programmer.

Yes. The dual power willem programmer is working very well on the most EPROM programming. Such as 27C512. I have programmed lots of them already.

However, you need set some jumpers before doign programming.
jpod1977 Posted - 07/15/2005 : 10:56:18
well i open the unit and put my meter on the Vpp test point and it stated 5v add external 12 supply to this test point and was able to program the chip twice after that my hand slipped and burnt out aan ic on the board (got hot and smoked) and now computer is not able to find programer so i do need a new one was looking at the Dual Power Willem Universal EPROM Programmer but i want to be sure that this will suport this chip and P87C51 in PLCC44( with adaptor to DIP40)
AM27(c)64 and 27256 Mainly 27 series in 12v PGM
usb Posted - 07/15/2005 : 10:39:27
Hi, the TOP853 is able to program the 27C512 in DIP28 package.
The TOP853 has a build in DC-DC step-up converter, so it can provide the 12.75 Vpp for the programming.

Most of 27C512 are programming compatible. So, you can select different 27C512 for trying.

If you are sure your TOP853 does not provide 12.7V vp on Pin22, then your programmer need to be serviced.

MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.05 sec. Snitz Forums 2000