T O P I C R E V I E W |
well |
Posted - 03/11/2009 : 08:00:32 I bought the programmer GQ3X several tests with several chips can only read not write off or can I do to test the programmer? |
5 L A T E S T R E P L I E S (Newest First) |
ZLM |
Posted - 04/15/2009 : 17:39:22 If your chip ID is correct and it is confirmed that the chip can be erased correctly. Then the chip may be defective. Change to another chip and try. |
well |
Posted - 04/14/2009 : 05:18:50 reading OK, erase OK. Write only 16% Flash 16-bit everything checked and tested error during recording |
ZLM |
Posted - 03/13/2009 : 22:14:59 Did you see the user guide of SST29VF3201 in CD? It has same settings with SST39VF1601.
See: http://www.mcumall.com/support/SST39VF1601_SST39VF3201Guide.PDF
|
well |
Posted - 03/13/2009 : 12:51:08 Set the adapter jumpers to VCC 3.6V and 29FX00 position. ID check failed. Please check device type, chip's orientation and pin contact. Some OEM chips may have compatible chip ID Continue? Yes ID check skipped Reading...Code Memory Elapsed time: 68.61 seconds. Read completed. ID check failed. Please check device type, chip's orientation and pin contact. Some OEM chips may have compatible chip ID Continue? Yes ID check skipped Erasing... Elapsed time: 1.64 seconds. Erase completed. ID check failed. Please check device type, chip's orientation and pin contact. Some OEM chips may have compatible chip ID Continue? Yes ID check skipped Reading...Code Memory Elapsed time: 68.61 seconds. Read completed. Chip sst39vf1601 le correctly, but does not erase Help |
ZLM |
Posted - 03/11/2009 : 21:47:28 What chip you tried to write? What the exact error message you got? |