T O P I C R E V I E W |
crusader |
Posted - 05/10/2009 : 08:14:03 Hi all,I bought a top 2049 for programming eprom and gal but, if i programming or erasing the palce16v8h-25 i have some problems, for example just select the chip gives me "no bit find file" and if I try to erase I answered "0000001000000010000000100000001000000010000000100000001000000010 0000001000000010000000100000001000000010000000100000001000000010 Error at: L0000 Blank Error at ...: 00000 (00) "
there is a solution to solve?
Thank you and hello |
3 L A T E S T R E P L I E S (Newest First) |
simeon |
Posted - 06/08/2009 : 14:15:57 use usb 1.1 12mbps or usb 1.1 by using usb 1.1 hub between the programmer and pc etc
this way forces usb 480kbps port to only use 12mbps as coms to top usb programmer |
crusader |
Posted - 06/07/2009 : 08:47:32 OK, I had seen that had come out a new version, I installed the new version, the v5.78, and finally I have the full support to palce16v8h, now the law and program well. 5.73 was the version that did not work well.
hello and thanks |
tinhead |
Posted - 05/28/2009 : 11:55:24 check with the newest software version, h**p://www.top2048.com/gb/tops/topwin5.exe it is 5.75 ( 5.72 had some pal/gal fix implemented ) |