MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Willem PCB5.0c and ADP-054 Adapter - DIP40 27C1024

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List Spell Checker
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

   Insert an Image File
 Check here to include your profile signature.
    

T O P I C    R E V I E W
shas595 Posted - 12/01/2014 : 04:26:04
Hello all, glad to join!
I am trying to read and copy a 27C1024 EPROM.

I have used the Willem PCB5.0C many times before for 27C512 and 27C256 with no problem. I had to get the ADP-054 adapter to use 40 and 42pin DIP chips. But no matter what I do I cant get it to work. When I select the chip it tells me I need the 16BIT DIP 40 adapter. I am not sure if it is supposed to recognize the adapter on its own or not. Usually it shows a pic of the board and various settings on the left. Any thoughts? I am stuck and in a bind as I need to get these chips out the door.

Thanks!
2   L A T E S T    R E P L I E S    (Newest First)
shas595 Posted - 12/02/2014 : 09:26:33
So when I put the adapter on, what are the jumper settings supposed to be. I did the dip settings but the chips are not reading and blank checking.
ZLM Posted - 12/01/2014 : 20:06:19
The PCB5.0 does not check the adapter. So, the adapter in software should be resented always.

MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000