MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 Cannot program with JDM PIC programmer

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List Spell Checker

* Forum Code is ON
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

   Insert an Image File
Check here to include your profile signature.

T O P I C    R E V I E W
BlueSky Posted - 11/17/2006 : 12:45:13
ICPprog105d and Winpic800 are giving errors.
Can anyone help me?
6   L A T E S T    R E P L I E S    (Newest First)
ZLM Posted - 07/03/2007 : 21:57:21
The modification is not mandatory to all PIC chip as I know.

The 12F629 will work well if you use IC-Prog1.05D. So, most likely the problem is from the software. The IC-Prog1.05D has the I/O delay option to user. The adjustable I/O delay is very use full on different computer speed.
Grey Posted - 07/03/2007 : 12:01:57
I Appear to be having the same problem, are there any workarounds aside from modifying the JDM Programmer? or will modifying it in this way cause any problems with other PIC's?
BlueSky Posted - 05/30/2007 : 07:49:42
I just did the changes same as the topic:

Anyway I found the IC-Prog1.05D works better. The PICPgm V0.9.9.5 works too, but need to do a empty read after detected the 12F629 chip. After empty read, then put the 12F629 in the ZIF do rest of operations.
karlr Posted - 05/29/2007 : 20:23:36
what changes did you make?
BlueSky Posted - 11/17/2006 : 12:59:44
I got 16F84 and 16F628A working on this programmer, but the 12F629 does not work.
After I checked the board and searched the internet on the JDM infomation, I found the 12F629 need extra time for VDD after VPP on.

I did a simple modification on the circuit and it is working on 12F629 with no problems what so ever with all JDM software programs I have found.
ZLM Posted - 11/17/2006 : 12:46:56
please check followings:

1. Can you confirm your have a good working RS232 port? The programmer does not work with USB-Serial adapter.
2. Did you put your chip in ZIF socket at the correct position?
See this link for chip positions:
3. Can you confirm the jumper are on the correct position?
4. Does the Green and Red LED on when doing read/write?
5. What is the voltage on the ICSP header Vpp pin and Vcc pin during the read and write? (relatively to GND pin)
6. What is the exact error message?

Software Setting:

MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.05 sec. Snitz Forums 2000