T O P I C R E V I E W |
on7tim7 |
Posted - 10/25/2009 : 15:24:50 I have a serial enhanced JDM programmer and today I try to use the ICSP connector on my new project. I am using a 16F88 pic with ICprog software and with the five ICSP cables connected to it’s respective pins I can program the pic perfectly but I can’t read it. Once I try to read it the pic gets erased. Please advice. |
2 L A T E S T R E P L I E S (Newest First) |
on7tim7 |
Posted - 10/27/2009 : 18:16:20 Thank you ZLM for your interest but no, the chip code protect bit is off. As a matter of fact, I can read, erase and re-program the chip on the zif socket but not when I connected it thought the ICSP. I have checked the voltages in every pin while reading or programming and they are good. I have also another very simple programmer with ICSP connector and it’s the one I am using now with the same pic. Please, help. |
ZLM |
Posted - 10/27/2009 : 16:19:03 The chip code protect bit is enalbed. |