Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
Otto
Posted - 08/28/2010 : 06:42:38 Hi, I'm very new to eproms and programmers.
I bought a programmer from ebay and I want to program 27C801 chips, but since right now I don't have any, I just want to test if the programmer is working ok. Here is a photo of my programmer:
54.18 KB
So, in order to test, I went to "Test H/W" tab and set the programmer switches like the picture below shows:
51.29 KB
But if I click on Help > Test Hardware, I get this error: "Hardware Error: Check power & connection". I have connected the USB and DB-25 parallel ports.
Does this mean it's defective or what am I doing wrong?
Thanks in advance.
1 L A T E S T R E P L I E S (Newest First)
Otto
Posted - 08/28/2010 : 19:18:40 Stupid me. I read the manual in the morning telling me to change BIOS setting for LPT but totally forgot that in the afternoon, when I actually had time to test.