MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
Using The Enhanced/Dual power Willem Programmer
Willem PCB PCB50a doen't work
Note:
You must be registered in order to post a reply.
To register,
click here
. Registration is FREE!
Screensize:
640 x 480
800 x 600
1024 x 768
1280 x 1024
UserName:
Password:
Format Mode:
Basic
Help
Prompt
Format:
Font
Andale Mono
Arial
Arial Black
Book Antiqua
Century Gothic
Comic Sans MS
Courier New
Georgia
Impact
Lucida Console
Script MT Bold
Stencil
Tahoma
Times New Roman
Trebuchet MS
Verdana
Size
1
2
3
4
5
6
Color
Black
Red
Yellow
Pink
Green
Orange
Purple
Blue
Beige
Brown
Teal
Navy
Maroon
LimeGreen
Message:
* HTML is OFF
*
Forum Code
is ON
Smilies
[quote][i]Originally posted by RedScorpion[/i] [br]Hi guys, iam working with the lpt version of willem pcb and have pcb revision 50a. I used this device for 6 years and today it doesnt work. Yesterday i solder a tsop 29F032 flashchip and want test the ID. From this moment the willem recognized nothing. I have different adapters like for 27C322,29F032 TSOp 40 and also us 27c801 eproms. X-Test with other pc and usb cable -> same issue X-Test with other lpt calbe -> not tried yet. The function "Test hardware" works sometimes with other settings, but the most of the time i got the "Hardware error"... I think any part of the pcb could be broken, but which? Which parts are responsible for detecting the hardware, energie and so on? I hope anyone could help Thanks. red [/quote]
Insert an Image File
Check here to include your profile signature.
T O P I C R E V I E W
RedScorpion
Posted - 06/22/2013 : 06:32:23
Hi guys,
iam working with the lpt version of willem pcb and have pcb revision 50a.
I used this device for 6 years and today it doesnt work.
Yesterday i solder a tsop 29F032 flashchip and want test the ID.
From this moment the willem recognized nothing. I have different adapters like for 27C322,29F032 TSOp 40 and also us 27c801 eproms.
X-Test with other pc and usb cable -> same issue
X-Test with other lpt calbe -> not tried yet.
The function "Test hardware" works sometimes with other settings, but the most of the time i got the "Hardware error"...
I think any part of the pcb could be broken, but which?
Which parts are responsible for detecting the hardware, energie and so on?
I hope anyone could help
Thanks.
red
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.09 sec.
Snitz Forums 2000