MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 programming 16f877 chip w/ enhanced jdm?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

rufioclark

1 Posts

Posted - 11/11/2007 :  23:28:07  Show Profile  Reply with Quote
i've been trying to program a 16f877-20/p with a hexfile written by the author of a circuit i've been building (tomscarff.tripod.com (pitch to midi)). i am new with the 16 bit microcontrollers and i know in the project i am working with this chip clocks with a 4mhz crystal. i do believe that i want a 16f877-04/p instead, but regardless the file has been failing to write with my enhanced jdm programmer. does this problem sound like the result of trying to program the wrong kind of chip? and should the hexfile write correctly with the correct microcontroller or am i going to need a more advanced programmer?
Reply #1

ZLM

2937 Posts

Posted - 11/15/2007 :  01:09:17  Show Profile  Reply with Quote
Check your DIP setting on the programmer.
Set the JP1 to 1-2 to select the 28-40 pin DIP.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000