MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 DIP settings for a couple of chips need them Badly
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  


2 Posts

Posted - 01/02/2008 :  14:44:20  Show Profile  Reply with Quote

I having trouble finding the devices in the menu in the willem eprom program version 97ja.

Hopefully they are supported. I have four socketed PLCC chips:
The first chip came with the purchase I made on ebay seller not mcumall. The second chip I flashed with the wrong bios and is really the one I need reflashed!!!

Winbond: W29C020CP90B


The last two I pulled from a dvd player and a hard drive but will like to know if they are reflashable and if so DIP switches.

EON: EN29F040

Also where do I find the chips on the actual willem program, don't I need them to be listed in order to program them?
Reply #1


2942 Posts

Posted - 01/03/2008 :  19:59:57  Show Profile  Reply with Quote
All DIP are showing in the software after you select the device type.

W29C020, 39SF/49F020, 29F020
Go to Top of Page
Reply #2


2 Posts

Posted - 01/05/2008 :  19:55:04  Show Profile  Reply with Quote
thank you and you are correct they are listed. I found the settings but the picture was not a PLCC device so it confused me the first time I found the device listed on the software.

Everything work. Saved my motherboard!!!
The best version was 97g. 97ja did not work properly.

Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.12 sec. Snitz Forums 2000