MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
TOP USB Programmer
Top 853 USB driver problem
Forum Locked
Printer Friendly
Author
Topic
Garrett
2 Posts
Posted - 07/27/2005 : 05:07:39
When I installed the setup software
it work
when it come to install the USB Device driver in the system
Windows said that the inf files on my CD is not valid
I download the drive on
www.mcumall.com
and it don't work too
I had my burner sincie december and it work well but not I try it on 4 computers and I had always the samed problem
thanks for your help
Reply #1
tulufan
28 Posts
Posted - 07/27/2005 : 15:42:50
You do not need install the driver once installed the software.
The setup software will do software setup and driver setup.
Reply #2
Garrett
2 Posts
Posted - 07/29/2005 : 19:06:43
I know but this winter the burner work well
now impossible to make it work
Reply #3
tulufan
28 Posts
Posted - 07/30/2005 : 13:41:11
Try to uninstall the software as well as windows driver.
And reinstall the software see if it works.
Topic
Forum Locked
Printer Friendly
Jump To:
Select Forum
MCUmall Forums
General Discuss
Novice Place
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
GQ-5X
Automobile engine ECU, Immo, Air bag chip tunning
Using The Enhanced/Dual power Willem Programmer
Wellon/WEILEI USB Programmer
TOP USB Programmer
EasyPRO/SmartPRO USB Programmer
PIC Programmer
Using the AVR JTAG ICE and AVRISP ISP programmer
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.08 sec.
Snitz Forums 2000