MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Winbond W25Q256JV
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

triangulum

Germany
9 Posts

Posted - 12/31/2022 :  03:01:17  Show Profile  Reply with Quote
Hello, can you please provide a config for the W25Q256JV WSON8 chip?

https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV
Reply #1

ZLM

2937 Posts

Posted - 12/31/2022 :  09:16:35  Show Profile  Reply with Quote
you can use W25Q256*SOIC16 or W25Q256*SOIC16*QUAD
they are using same read and writ algorithm.

Those two chips are in Re7.31 software.
Go to Top of Page
Reply #2

triangulum

Germany
9 Posts

Posted - 01/01/2023 :  03:40:59  Show Profile  Reply with Quote
Thank you. What is the correct pin orientation in the programmer ZIF socket when using WSON8 instead of SOIC16?


Edited by - triangulum on 01/01/2023 05:06:21
Go to Top of Page
Reply #3

KillMe3

Germany
7 Posts

Posted - 01/02/2023 :  08:27:44  Show Profile  Reply with Quote
need also config for this plz
Go to Top of Page
Reply #4

triangulum

Germany
9 Posts

Posted - 01/04/2023 :  04:25:51  Show Profile  Reply with Quote
Will this work using jumper wires?
Go to Top of Page
Reply #5

anniel

2529 Posts

Posted - 01/04/2023 :  04:35:50  Show Profile  Reply with Quote
quote:
Originally posted by triangulum

Will this work using jumper wires?




Yes, it should.
Go to Top of Page
Reply #6

KillMe3

Germany
7 Posts

Posted - 01/04/2023 :  05:06:42  Show Profile  Reply with Quote
quote:
Originally posted by triangulum

Will this work using jumper wires?




sagst du mir Bescheid, ob es geklappt hat!?
Go to Top of Page
Reply #7

triangulum

Germany
9 Posts

Posted - 01/16/2023 :  13:51:31  Show Profile  Reply with Quote
Unfortunately I had no success yet using multiple probes. Either my pinout is wrong or the W25Q256*SOIC16 firmware does not work with this chip?

W25Q256*SOIC16: "Unknown Device"
W25Q256*SOIC16*QUAD: "Signature length error.Please report this bug."

CH341A is reading the chip so it is not broken.

Edited by - triangulum on 01/17/2023 06:53:33
Go to Top of Page
Reply #8

anniel

2529 Posts

Posted - 01/16/2023 :  16:52:58  Show Profile  Reply with Quote
quote:
Originally posted by triangulum

Unfurtatly I hat no success yet using multiple probes. Either my pinout is wrong or the W25Q256*SOIC16 firmware does not work with this chip?

W25Q256*SOIC16: "Unknown Device"
W25Q256*SOIC16*QUAD: "Signature length error.Please report this bug."

CH341A is reading the chip so it is not broken.



Can you post pictures of you setup?
Go to Top of Page
Reply #9

triangulum

Germany
9 Posts

Posted - 01/17/2023 :  01:33:44  Show Profile  Reply with Quote
https://imgur.com/a/gXjSsD7

Edited by - triangulum on 01/17/2023 01:35:55
Go to Top of Page
Reply #10

anniel

2529 Posts

Posted - 01/17/2023 :  08:24:05  Show Profile  Reply with Quote
quote:
Originally posted by triangulum

https://imgur.com/a/gXjSsD7



Are you trying to do this in-circuit?
Go to Top of Page
Reply #11

triangulum

Germany
9 Posts

Posted - 01/17/2023 :  09:21:37  Show Profile  Reply with Quote
Yes.

Edited by - triangulum on 01/17/2023 09:22:17
Go to Top of Page
Reply #12

anniel

2529 Posts

Posted - 01/17/2023 :  09:55:35  Show Profile  Reply with Quote
quote:
Originally posted by triangulum

Yes.



Circuit is powered?
Go to Top of Page
Reply #13

triangulum

Germany
9 Posts

Posted - 01/17/2023 :  09:59:45  Show Profile  Reply with Quote
quote:
Originally posted by anniel
Circuit is powered?



No.
Go to Top of Page
Reply #14

anniel

2529 Posts

Posted - 01/17/2023 :  10:45:11  Show Profile  Reply with Quote
quote:
Originally posted by triangulum

quote:
Originally posted by anniel
Circuit is powered?



No.



The GQ-4X can not power the whole circuit.
Go to Top of Page
Reply #15

triangulum

Germany
9 Posts

Posted - 01/17/2023 :  11:59:12  Show Profile  Reply with Quote
Uh, you sure? Given that a ~$10 gadget from AliExpress can do this I would expect this from a ~$100 device too.

Edited by - triangulum on 01/17/2023 11:59:37
Go to Top of Page
Reply #16

anniel

2529 Posts

Posted - 01/17/2023 :  13:50:24  Show Profile  Reply with Quote
quote:
Originally posted by triangulum

Uh, you sure? Given that a ~$10 gadget from AliExpress can do this I would expect this from a ~$100 device too.



Positive. That only shows the gadget has no regulation and current limiting. All professional programmers are designed to work without giving power other than for a single chip except gang programmers and even those won't support powering a PCB.
Go to Top of Page
Reply #17

triangulum

Germany
9 Posts

Posted - 01/18/2023 :  00:02:41  Show Profile  Reply with Quote
Thank you for the clarification.
Go to Top of Page
Reply #18

anniel

2529 Posts

Posted - 01/18/2023 :  08:06:19  Show Profile  Reply with Quote
quote:
Originally posted by triangulum

Thank you for the clarification.



You're welcome.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.29 sec. Snitz Forums 2000