MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 TOP2004 problem
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

ninninetynine

2 Posts

Posted - 09/12/2005 :  21:28:50  Show Profile  Reply with Quote
I just started working with my new TOP2004 and I was able to read about 5 chips, then I started having problems. Every chip I try says error on pin 21. I can't see anything wrong with the chip, and it does this even on chips that worked a few minutes ago. Any help would be appreciated.
Reply #1

usb

138 Posts

Posted - 09/13/2005 :  11:48:28  Show Profile  Reply with Quote
It seems your programmer ZIF socket has contacting problem on that pin.

Check that pin on ZIF socket. The ZIF socket is removeable from programmer. You can carefully remove the ZIF from the programmer and put it back after clearn the ZIF.

OR you can just turn off the pin detection from the Setting menu.
Go to Top of Page
Reply #2

G1964

USA
1 Posts

Posted - 09/25/2005 :  08:29:41  Show Profile  Reply with Quote
I had a same problem with Top2048. I fixed it by switching from one chip vendor to another. By the way, in my IC failed pin(s) were not suppose to be connected. Seems like guys are having problems with chip configuration files.

George.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.22 sec. Snitz Forums 2000