MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 PRG-017 USB PIC programmer - Pse Help !!!
 Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

yonglim

2 Posts

Posted - 08/06/2008 :  16:34:33  Show Profile
I just got my PRG-017 USB PIC programmer 2 days ago which I had bought from Ebay.
So it did not come with CD-Rom

Can you tell me if there is any instruction to setup the USB PIC Programmer?

I have download and install the PL2303 USB-serial driver from
http://www.mcumall.com/comersus/store/mcumall_download.asp
And is able to see that the USB PIC programmer
is connected to my Serial Port 5
(Prolific USB-to-Serial Comm Port (COM5))

But I am not sure what are software to install to start to program my PIC.

I have tried with WinPic800 (v 3.63c), but not sure what to select for the Hardware Settings

Please advice, thanks.
Reply #1

ZLM

2945 Posts

Posted - 08/13/2008 :  14:05:00  Show Profile
There should be a download link for the USB PIC programmer on its package. If it is not there, please contact support@mcumall.com for the download link.

The WinPic800 is not for the USB PIC programmer.

As long as you got the correct software, you shoulde be able to use it easily. There are no much setup on the programemr and software.
You only need to set your COM5 in the software.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000