MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 TOP2004 USB driver/SW
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

leutholl

2 Posts

Posted - 11/15/2005 :  17:23:50  Show Profile  Reply with Quote
Hello,

I just bought a TOP2004 Programmer and guess what I worked - once!
I have the same problem as stated in the TOP2003 subjects "EAccessViolation" or "No Device"!
Deinstall driver and software and install the whole thing works once.

There must be a solution for this problem. I also wonder what the little tool "Reload USB driver" is exactly about...

I use WinXP SP2.

If I start the TopWinEn Software (having the "no Device" error") and do a USB search inside the programm it sees to programmer, but reading/writing to a chip doesn't work.

In the control panel I have a new category "Jungo"
with the entries
- Top Programmer
- WinDriver
To disable to driver and to enable the driver back doesn't fix the problem.

I think somewhere in the registry or somewhere else, an entry gets modified after the very first run of the programm (working).
If we found the change, this could eventualy lead to a solution.

Please share what you know about this problem and the TOP2004 product.

Greetings from Switzerland,

Lukas Leuthold
Reply #1

usb

138 Posts

Posted - 11/18/2005 :  01:31:43  Show Profile  Reply with Quote
see http://www.mcumall.com/forum/topic.asp?TOPIC_ID=170
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.19 sec. Snitz Forums 2000