MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 Top2004 can't program
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Gr0over

5 Posts

Posted - 01/04/2009 :  01:13:55  Show Profile  Reply with Quote
Hello,

I just bought a Top2004 programmer. I can't program anything with it... tried 4 different 27C040, 1 27C010, 1 27C4001, they all can be read and blank verified, but all miserably fail to program , the 27C040 all stop after the beginning with error message "000010:Error! (file=31,chip=20)" , the 27C4001 went a bit further and stopped with "018ce0:Error! (file=00,chip=02)". Using topwin version 2.52 english software.
Checked the USB power, 10/10, tried on another computer, same result..
Thanks.

Programmer: GQ-4X
Reply #1

Gr0over

5 Posts

Posted - 01/04/2009 :  02:53:50  Show Profile  Reply with Quote
Well, after trying to read the failed writes, I see that:
- the first 16 bytes are OK
- the following are garbage
- the next 16 bytes are again ok
- etc...

Definitely looks like a hardware problem with the programmer....

Programmer: GQ-4X
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000