MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 willem programmer cannot write 95040 successfully
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  


17 Posts

Posted - 04/28/2009 :  19:22:09  Show Profile  Reply with Quote
if you took the hex and divided it up in to 4 equal rectangles, the device will program the top left 1/4 space. then it tries to write the remaining 3/4 of data in to the top right section. the bottom half of the data on the chip is never erased or written. i can provide a picture to better explain what im talking about. i have read other places programming 95040 with a willem is a known issue. is there a fix?? thanks.
Reply #1


2942 Posts

Posted - 05/18/2009 :  15:08:29  Show Profile  Reply with Quote
The chip may be protected on some section.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.2 sec. Snitz Forums 2000