MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 Top2048 and DS89C430
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

g1powermac

2 Posts

Posted - 12/01/2006 :  11:27:05  Show Profile  Reply with Quote
Hi All,

I got a Top2048 and I'm trying to program a DS89C430. However it is failing to program. When I click the program button, it tells me this: "Bad Type, Continue?" If I click yes, it seems to program, but fails the verification. Any suggestions?

Thanks,
J Silverman
Reply #1

g1powermac

2 Posts

Posted - 12/01/2006 :  11:30:56  Show Profile  Reply with Quote
Also, I'm using the most recent version of the TopWin software, v2.33.

Thanks
Go to Top of Page
Reply #2

evilpicster

Ethiopia
3 Posts

Posted - 03/28/2007 :  14:21:15  Show Profile  Reply with Quote
I see this over and over in these groups and I think I know the answer
this error is when the software is not set to program your specific chip
on the tool buttons there is something that says something to the effect of "type" and if you click on that it will give you a dialog box that has the manufactures in one list and the chip type in another list. be sure you have the correct ones selected example pic16f674 will not work for a pic16f674A if your chip is not listed it's anyones guesss if something close will match well enough not to cause problems also the program uses this setting to test pins so if you get an error that says bad pins 1,12,14 (any combination of bad pins) chances are this setting is incorrect. Peace Out
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.14 sec. Snitz Forums 2000