MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 Reading a 2MB ROM on Willem Enhanced
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

NetSamurai

USA
1 Posts

Posted - 12/25/2004 :  00:03:39  Show Profile  Reply with Quote
I am waiting for my Willems Enhanced programmer to arrive. The first project I have planned for this is to read a 2MB ROM. Also, this ROM will need to be tapped into as it is located on a COB. That shouldn't be a problem, but here's my questions:

I see in the schematic that the address bus can go to A23 but the ZIF only lists up A15. I will need up to A20. I am wondering if this will be possible and if so, how? Anybody have any idea which chips settings to try? Is there a "general" setting? Is it possible to develop your own chip profiles for the software to use? Obviously, since this is a ROM, I am only planning to read the device, so any programming specific settings shouldn't matter.

Thanks a million for any help and happy holidays!

Scott McDonnell
Reply #1

usb

138 Posts

Posted - 12/29/2004 :  18:35:52  Show Profile  Reply with Quote
I think you need a adapter. You need to know the exact part number and then select a right adapter.

The software should be willem programmer software.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.26 sec. Snitz Forums 2000