MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Automobile engine ECU, Immo, Air bag chip tunning
 IMMO IC - ST M95040 - How best to read/program?
 Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

swamper8

USA
2 Posts

Posted - 05/26/2011 :  15:57:13  Show Profile
Can someone recommend the best way to read and program a EEPROM such as the ST M95040? This is the IC used to store the IMMO information on my Audi's ECU. I have several MICROCHIP programmers but to the best I've been able to figure out they will not program these small EEPROM's. Here's a link to the datasheet:

h**p://www.st.com/stonline/books/pdf/docs/6512.pdf

I'm guessing I'll need a programmer and a adapter. This chip uses SPI programming so I think I shouldn't really need anything fancy?

the cheaper the better
Reply #1

ZLM

2945 Posts

Posted - 05/26/2011 :  16:36:12  Show Profile
Most of universal programmers should support this chip.

Like GQ-4X programmer.
Go to Top of Page
Reply #2

swamper8

USA
2 Posts

Posted - 05/26/2011 :  17:23:19  Show Profile
quote:
Originally posted by ZLM

Most of universal programmers should support this chip.

Like GQ-4X programmer.



yeah I found that while searching the archives here. I would need a adapter to match the footprint of the chip for sure.

Is it safe to assume the GQ-4X comes with some sort of basic program that will let me read/write?
Go to Top of Page
Reply #3

ZLM

2945 Posts

Posted - 06/04/2011 :  15:55:24  Show Profile
Yes. The GQ-4X comes with the software to let you read and write the chip.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000