MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
Automobile engine ECU, Immo, Air bag chip tunning
Read Atmel AT28HC256E LCC-32 in-circuit.
Forum Locked
Printer Friendly
Author
Topic
F-bone
30 Posts
Posted - 10/08/2010 : 05:30:21
Hi guys,
I purchased a GQ-4X a few days ago and I need to read and then write the Atmel AT28HC256E LCC-32 while in-circuit... Is this possible? Do I need to connect wires on the chip and then put them in the ZIF socket?
Are all the pins required?
Thank you in advance,
F
Reply #1
ZLM
2945 Posts
Posted - 10/08/2010 : 20:00:43
The chip can not be programmed in circuit. It must be placed on the programmer ZIF socket.
Topic
Forum Locked
Printer Friendly
Jump To:
Select Forum
MCUmall Forums
General Discuss
Novice Place
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
GQ-5X
Automobile engine ECU, Immo, Air bag chip tunning
Using The Enhanced/Dual power Willem Programmer
Wellon/WEILEI USB Programmer
TOP USB Programmer
EasyPRO/SmartPRO USB Programmer
PIC Programmer
Using the AVR JTAG ICE and AVRISP ISP programmer
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.07 sec.
Snitz Forums 2000