MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
eeprom 5p08c3
New Topic
Reply to Topic
Printer Friendly
Author
Topic
manuelsanchez
Spain
8 Posts
Posted - 04/20/2015 : 23:41:39
Hello, I have the problem to write this eeprom.
this is what it says in the program :
verifi failed, addres=0x000000, device=FF, buffer=0x5B
What is the problem?
Reply #1
ZLM
2937 Posts
Posted - 04/24/2015 : 17:56:31
check followings:
1. chip is 5P08C3
2. chip pin 1 is at the up-left
3. chip is a good chip
4. try slower speed
Topic
New Topic
Reply to Topic
Printer Friendly
Jump To:
Select Forum
MCUmall Forums
General Discuss
Novice Place
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
GQ-5X
Automobile engine ECU, Immo, Air bag chip tunning
Using The Enhanced/Dual power Willem Programmer
Open Source Project Willem Programmer Hardware
Wellon/WEILEI USB Programmer
TOP USB Programmer
EasyPRO/SmartPRO USB Programmer
PIC Programmer
Using the AVR JTAG ICE and AVRISP ISP programmer
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.14 sec.
Snitz Forums 2000