MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 top2048 000001:Error at (file=e3,device=ff)
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  


11 Posts

Posted - 06/15/2007 :  21:59:03  Show Profile  Reply with Quote

i'm trying to program some type of eproms, mainly 27c160

it's all ok, program works and say OK when finish to burn, but when it start the VERIFY give me this error message:

000001:Error at (file=e3,device=ff)

i replace the eproms on my top2048 programmer and test it and it's blank, not programmed.

someone can help me?

thanks in advance.

Reply #1


2926 Posts

Posted - 06/24/2007 :  00:08:18  Show Profile  Reply with Quote
Check the Vpp pin if it is correct during the programming. If the Vpp correct (about 12V), then the programmer need to repair.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.2 sec. Snitz Forums 2000