MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ Software Buffer ASCII To Hex Suggestion
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Krankshaft

10 Posts

Posted - 10/10/2015 :  23:58:15  Show Profile  Reply with Quote
Just a quick suggestion for future versions of the GQ-4X software.

When I'm programming EEPROMs that hold calibration constants for test equipment. I usually put some ASCII in the unused space that says when the device was calibrated.

When using another programmer the software allows me to type directly into the ASCII field in the buffer and it automatically converts it to hex.

I noticed in the GQ software I can't type in the ASCII field which means I need to convert my text to hex first and type in the hex manually.

It would be a nice feature to be able to type into the ASCII field directly .

Thanks For Your Time.

Edited by - Krankshaft on 10/11/2015 00:06:42
Reply #1

ZLM

2937 Posts

Posted - 10/14/2015 :  07:01:57  Show Profile  Reply with Quote
Thank you for your suggestion.

This will be considered in newer software release.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000